Whether you’re cutting thin sheet or plate up to 4” thick, you need a Bowlin self cleaning downdraft under it all. Built to your specifications and your particular needs, Bowlin self cleaning down drafts are fixture built up to 24’ wide and 65’ long.

LOOK, IF YOU’RE IN THE CUTTING BUSINESS THIS DOWNDRAFT TABLE

WILL HELP YOU KEEP IT CLEAN!

Heavy, durable construction using a minimum of ¼” plate and tubing combined with a full length fixture gives an absolutely straight and level table over it’s entire length.

 Air operated draft doors divide the downdraft into 5’ zones decreasing the required air flow. Standard 5’ zones are operated by proximity switches as the cutting machine moves up and down the cutting table.

 Slag removal is handled by a scraper which is pulled up a ramp at the end to dump into a roll out slag pan. Our patent pending drive mechanisms are located out of the slag and cutting zone; In fact, you can cycle the scraper and dump operation while cutting. 

Two continuous cables pull the scraper through the clean and returns motions; the scraper lifts on the return stroke so no slag is pushed away from the slag roll out pan.

REMEMBER THESE BOWLIN SELF CLEANING DOWNDRAFT TABLE FEATURES!

1. Fixture built to give a straight, level table.
2. Scraper drive mechanism located out of the cutting zone.
3. No electrical cords slide or cord reels to repair.
4. Zoned operation- 5’ standard, 2.5’ optional.
5. Cutting bars 3/16 x 4 – 4” o.c.
6. Small parts catch screen below cutting bars.
7. No holes in floor for slag pan.
8. Slag pan rolls out for dumping.
9. Cartridge filter box.
10. Optional cyclone pre filter or spark arrestor and HEPA final filter.

Company Information:
Name: Bowlin Engineering Co.
Address: 600-T Burlington Rd.
City: Fort Worth
State: TX
ZIP: 76179 1310
Phone: 817-232-2020
FAX: 817-232-4081
http://www.bowlinengineering.com

Year est. 1967

Company description:
Material Handling Equipment

 Download PDF